บริหารงานและให้บริการโดย ทีมวิศวกรอาชีพ ครับผม
Contract Us ( ขอใบเสนอราคา หรือ ติดต่อสั่งซื้อสินค้าได้ที่นี่ครับ )
ติดต่อ คุณอ้น
โทรศัพท์ 098-2467624 หรือ 089-6086450
E-mail : thebest.td9@gmail.com
Line iD : www.Amata-Spare.com
บริษัท เดอะเบสท์เทรดเดอร์แอนด์เซอร์วิส จำกัด
The best trader and service Co.,Ltd
-
Sandvik T-Max P Negative Tip Shank Bit
SANDVIK
45 Day(s) or more -
SDJC Type (External Diameter, Profiling) Holder
KYOCERA
3 Day(s) or more -
SEC-M Type Bit, MTJN Type
SUMITOMO ELECTRIC HARDMETAL
Same day or more -
SEC-70 Type Bit, PTGN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
WTKN-N Type (outer diameter, end surface, profile machining)
KYOCERA
3 Day(s) or more -
SVJB-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
3 Day(s) or more -
SVJB Type (outer diameter, profile machining)
KYOCERA
Same day or more -
CN○○ Insert Supported Bit, for Outer Diameter / End Machining, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SEC-30 Type Bit, ETGN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SVVB Type (outer diameter, profile machining)
KYOCERA
3 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L
SANDVIK
5 Day(s) or more -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDFCR/L
TUNGALOY
45 Day(s) -
DN○○ Insert Supported Bit, for Outer Diameter / Profiling, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
TLHR TL Bit, for Outer Diameter, Profile Machining
MITSUBISHI MATERIALS
3 Day(s) or more -
VN○○ Insert Compatible Bit, for End Surface and Profile Machining, MP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SEC-Mini Bit, STAC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, SVPC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DTGN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-M Type Bit, MWLN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SWC-SV Type Mini Bit SVLC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
PCLN Type (External Diameter/End-Face Machining)
KYOCERA
3 Day(s) or more -
ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)
KYOCERA
3 Day(s) or more -
S…SDLC Type (External Diameter, Copy Machining)
KYOCERA
5 Day(s) or more -
CORO-TURN RC, Shank Bit for Negative Tips
SANDVIK
5 Day(s) or more -
Shank Tool Bit T-Max P Lever Clamp PCLNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PCLNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SVHBR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Shank Tool Bit, CoroTurn 107 Screw Clamp, SVJBR/L
SANDVIK
11 Day(s) or more -
Sandvik CoroTurn 107 Positive Tip Shank Bit
SANDVIK
45 Day(s) -
Sandvik CoroTurn 107 Positive Tip Shank Bit
SANDVIK
5 Day(s) or more -
Holder For Front-Turning, SDJC-N/SDJC
NTK CUTTING TOOLS
4 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PTFN 90°
WIDIA
23 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBPR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDNN
TUNGALOY
3 Day(s) or more -
Type M TAC Tool Bit for Outer Diameter, Screw On Type MVVNN
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDPNN
TUNGALOY
45 Day(s) -
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN
TUNGALOY
3 Day(s) or more -
Turning A, Lever Lock Type PCBNR/L
TUNGALOY
45 Day(s) -
RC○○ Insert Compatible Bit for External Diameter and Profiling LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SC○○Insert Compatible Bit for External Diameter, End Face and Chamfer Machining SP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
TE○○ Insert Compatible Bit, for Outer Diameter Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
VC○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, SP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
VN○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, MP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
VN○○ Insert Compatible Bit, for End Surface and Profile Machining, Double Clamp Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
XC○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Profile Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
DCLN/DCMN/DDJN for Combined Machining, for Outer Diameter / End Face / Inner Diameter Processing, Double Clamp Type
MITSUBISHI MATERIALS
5 Day(s) or more -
For Composite Machining Holder for Mounting Square Cutting Bit for Outer Diameter/Edge Machining
MITSUBISHI MATERIALS
5 Day(s) or more -
SEC-Mini Bit, STGC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Wide Bit, SGW Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PCLN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PSSN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PTFN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-SC Type Bit, SCLC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Mini Bit, SCAC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DVJN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DDNN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
HELI TURN, SLANR/L (for Outer Diameter Machining)
ISCAR
45 Day(s) or more -
Holder for Outer Diameter Machining (Screw Clamp) SDJCR/L, SDNCN
ISCAR
45 Day(s) -
PTFN Type (End Face Machining)
KYOCERA
3 Day(s) or more -
WTJN-N Type (outer diameter, profile machining)
KYOCERA
3 Day(s) or more -
PWLN Type (External Diameter/End-Face Machining)
KYOCERA
Same day or more -
CBSN Type (Outer Diameter Rounded Chamfering)
KYOCERA
5 Day(s) or more -
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
KYOCERA
3 Day(s) or more -
SDLC-FF Type (without Offset) (External Diameter / Profiling)
KYOCERA
5 Day(s) or more -
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
3 Day(s) or more -
SVLP-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
5 Day(s) or more -
S…SCLC Type (External Diameter/End-Face Machining)
KYOCERA
5 Day(s) or more -
SCLN Type (without Offset) (External Diameter / End Face Machining)
KYOCERA
5 Day(s) or more -
Turning Processing Holder, Boring Tool Bit
SANDVIK
11 Day(s) or more -
CoroTurn HP Cutting Head, CoroTurn 107 Screw Clamp System, High Pressure Coolant Specification, C-SVJBR/L-HP
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L
SANDVIK
11 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDNCN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L
SANDVIK
12 Day(s) or more -
Holder For Front-Turning, DS-SCL-ACH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, TCLN/WCLN/HCLN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WDJN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, TBVC-F10
NTK CUTTING TOOLS
6 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PCLN 95°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PTGN 90°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SCLC 95°
WIDIA
23 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CKJNR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBNR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDPN
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSKNR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSNR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSPR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTCPR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTFNR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTFPR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTGNR/L
TUNGALOY
3 Day(s) or more -
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTGPR/L
TUNGALOY
3 Day(s) or more -
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ESDNR/L
TUNGALOY
3 Day(s) or more -
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ESSNR/L
TUNGALOY
3 Day(s) or more -
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETANR/L
TUNGALOY
3 Day(s) or more -
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETENN
TUNGALOY
3 Day(s) or more -
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETGNR/L
TUNGALOY
3 Day(s) or more -
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETXNR/L
TUNGALOY
3 Day(s) or more -
Type H TAC Tool Bit for Outer Diameter, Retractable Pin Type HSRNR/L
TUNGALOY
45 Day(s) -
J-Series, Type JT / Outer Diameter Cutting, Screw-On Type JSDJCR/L
TUNGALOY
45 Day(s) -
J-Series, Type JT / Outer Diameter Cutting, Rear Clamp Type JTTANR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSCGCR/L
TUNGALOY
45 Day(s) or more -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSCLCR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDN3CR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSEGR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-SDUCL
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSTACR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-TBL3
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L
TUNGALOY
45 Day(s) -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSXBR/L
TUNGALOY
45 Day(s) or more -
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSXGR/L
TUNGALOY
45 Day(s) or more -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MCLNR/L
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDJNR/L
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTENN
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTJNR/L
TUNGALOY
65 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTQNR/L
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVJNR/L
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVQNR/L
TUNGALOY
45 Day(s) -
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MWLNR/L
TUNGALOY
45 Day(s) -
P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN
TUNGALOY
45 Day(s) -
P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRGCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SCLCR/L
TUNGALOY
45 Day(s) or more -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDJCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDNCN
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDQCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRACR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRDCN
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRGCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDCN
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDPN
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type STACR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L
TUNGALOY
45 Day(s) -
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVVCN
TUNGALOY
45 Day(s) -
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN
TUNGALOY
3 Day(s) or more -
W Type TAC Bit for Outer Diameter, Wedge-on Type WTJNR/L
TUNGALOY
3 Day(s) or more -
Y-Pro Series S Type Screw-on Type SYHBR/L
TUNGALOY
45 Day(s) -
Y-Pro Series S Type Screw-on Type SYIBN
TUNGALOY
45 Day(s) -
Y-Pro Series S Type Screw-on Type SYJBR/L
TUNGALOY
45 Day(s) -
Y-Pro Series S Type Screw-on Type SYQBR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ACLNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ADJNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ADPNN
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ADQNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ARGNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ASBNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ASDNN
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ASKNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ASSNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ATFNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ATGNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type ATJNR/L
TUNGALOY
45 Day(s) or more -
Turning A, Double-Clamp Type ATQNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type AVJNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type AVQNR/L
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type AVVNN
TUNGALOY
45 Day(s) -
Turning A, Double-Clamp Type AWLNR/L
TUNGALOY
45 Day(s) or more -
Turning A, Lever Lock Type PCFNR/L
TUNGALOY
45 Day(s) -
Holder for Outer Diameter Machining PCLNR/L
TUNGALOY
45 Day(s) or more -
Holder for Outer Diameter Machining PDJNR/L
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PDPNN
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PDQNR/L
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PRGNR/L
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PSBNR/L
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PSDNN
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PSKNR/L
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PSSNR/L
TUNGALOY
45 Day(s) -
Turning A, Lever Lock Type PTFNR/L
TUNGALOY
45 Day(s) -
Outer Diameter Machining Cutting Bit PTGNR/L Model
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DCLNR/L
TUNGALOY
45 Day(s) or more -
Turning A, One/Double Type DDJNR/L
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DRGNR/L
TUNGALOY
45 Day(s) or more -
Turning A, One/Double Type DSBNR/L
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DSDNN
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DSKNR/L
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DSSNR/L
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DTFNR/L
TUNGALOY
45 Day(s) or more -
Turning A, One/Double Type DTGNR/L
TUNGALOY
45 Day(s) -
Turning A, One/Double Type DWLNR/L
TUNGALOY
45 Day(s) -
Turning A, One Double Type DDQNR/L
TUNGALOY
45 Day(s) or more -
Turn Tech T-Type, Screw On Type TLANR/L
TUNGALOY
45 Day(s) -
Turn Tech T-Type, Screw On Type TLBNR/L
TUNGALOY
45 Day(s) -
Turn Tech T-Type, Screw On Type TLFNR/L
TUNGALOY
45 Day(s) -
Turn Feed X-Type, Double-Clamp Type XWXPR/L
TUNGALOY
45 Day(s) -
C Type with Dimples for Ceramic Insert, Double-Clamp Type CCLNR/L
TUNGALOY
45 Day(s) -
C Type with Dimples for Ceramic Insert, Double-Clamp Type CDJNR/L
TUNGALOY
45 Day(s) -
C Type with Dimples for Ceramic Insert, Double-Clamp Type CDNNN
TUNGALOY
45 Day(s) -
C Type with Dimples for Ceramic Insert, Double-Clamp Type CHSNR
TUNGALOY
45 Day(s) -
C Type with Dimples for Ceramic Insert, Double-Clamp Type CSSNR/L
TUNGALOY
45 Day(s) -
C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN
TUNGALOY
45 Day(s) -
CC○○ Insert Supported Bit, for Outer Diameter / End Machining, SP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
CN○○ Insert Supported Bit, for Outer Diameter / End Machining, Double Clamp Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
CN○○ Insert Supported Bit, for Outer Diameter / End Machining, Bit for Heavy Machining
MITSUBISHI MATERIALS
5 Day(s) or more -
CN○○ Insert Supported Bit, for Outer Diameter Machining, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
Tool Bit Compatible with DC○○ Insert, SP Tool Bit for Outer Diameter / Profile Machining SDJC
MITSUBISHI MATERIALS
3 Day(s) or more -
DE○○ Insert Supported Bit, for Outer Diameter / Profiling, Bit for Aluminum Alloy
MITSUBISHI MATERIALS
3 Day(s) or more -
DN○○ Insert Supported Bit, for Outer Diameter / Profiling, Double Clamp Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
DN○○ Insert Supported Bit, for End Machining / Profiling, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
RC○○ Insert Compatible Bit for External Diameter, End Face and Profiling LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
RC○○ Insert Compatible Bit for External Diameter, End Face and Profiling SP Bit
MITSUBISHI MATERIALS
5 Day(s) or more -
RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SN○○ Insert Compatible Bit, Outer Diameter, Terminal Surface, for Chamfering, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SN○○ Insert Compatible Bit, Outer Diameter, for Chamfering, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SN○○ Insert Compatible Bit, for Outer Diameter Machining, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
SN○○ Insert Compatible Bit, for Outer Diameter Machining, Double Clamp Bit for Heavy Cutting
MITSUBISHI MATERIALS
5 Day(s) or more -
SN○○ Insert Compatible Bit, for Terminal Surface Machining, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
MSSN SN Insert Compatible Bit for External Diameter, End Facing and Chamfering Double Clamp Bit for Heavy Cutting
MITSUBISHI MATERIALS
5 Day(s) or more -
TC○○ Insert Compatible Bit, for Outer Diameter Machining, SP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
TE○○ Insert Compatible Bit, for End Surface Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
TN○○ Insert Compatible Bit, for Outer Diameter Machining, Double Clamp Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
VC○○ Insert Compatible Bit, for End Surface and Profile Machining, SP Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
VN○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Double Clamp Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
WN○○ Insert Compatible Bit, for Outer Diameter and Terminal Surface Machining, LL Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
WN○○ Insert Compatible Bit, for Outer Diameter Machining, Double Clamp Bit
MITSUBISHI MATERIALS
3 Day(s) or more -
CSVH Outer Diameter Cam Type, Pre-Grinding / Copying / Piercing / Back-Grinding / Grooving /Thread Cutting
MITSUBISHI MATERIALS
5 Day(s) or more -
TTAH External Threading Machining
MITSUBISHI MATERIALS
3 Day(s) or more -
BTAH Outer Diameter Back-Grinding Machining
MITSUBISHI MATERIALS
3 Day(s) or more -
GTAH/GTBH/GTCH Outer Diameter Groove Filling
MITSUBISHI MATERIALS
3 Day(s) or more -
Outer Diameter Forward Pulling, Profiling, Edge Machining
MITSUBISHI MATERIALS
5 Day(s) or more -
SCAC/SCLC/SDJC/SDNC/SVLP/SVJB/SVVB/SVPP-SM Outer Diameter Pre-Grinding Machining, No Offset
MITSUBISHI MATERIALS
3 Day(s) or more -
CTCH Outer Diameter Cutting Process
MITSUBISHI MATERIALS
3 Day(s) or more -
DCLN for Combined Machining, for Outer Diameter / End Face / Inner Diameter Processing, Double Clamp Type
MITSUBISHI MATERIALS
5 Day(s) or more -
PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining
MITSUBISHI MATERIALS
5 Day(s) or more -
PCLN/PCMN for Combined Machining, for Outer Diameter / End Face Processing
MITSUBISHI MATERIALS
5 Day(s) or more -
PDJN/PDNN for Combined Machining, for Outer Diameter / Profile Machining
MITSUBISHI MATERIALS
5 Day(s) or more -
DDJN/DDNN for Combined Machining, for Outer Diameter / Profile Machining, Double Clamp Type
MITSUBISHI MATERIALS
5 Day(s) or more -
SVPB for Combined Machining, for End Face / Profile Machining
MITSUBISHI MATERIALS
5 Day(s) or more -
CTAH/CTAH-S Small Tool Bit (Outer Diameter Cutting-Off)
MITSUBISHI MATERIALS
3 Day(s) or more -
Tool Bit Compatible with DC○○ Insert, SP Tool Bit for Outer Diameter / Profile Machining SDNC
MITSUBISHI MATERIALS
5 Day(s) or more -
SEC-MV Type Copying Tool, MVPC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-MV Type Copying Tool, MVXC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-GD Type Profiling Bit GDE Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FCLN
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FN11
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FN21
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, SBT Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, SDNC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, CSDP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CSRP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CTFP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CTGP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, DDHN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, DVQN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, DVVN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, ETXN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, MTXN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, PCLN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, SVVC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
T-REX Tool Bit DTR55C
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
T-REX Tool Bit DTR55Q
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, SS Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, SC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Mini Bit, SD Type (11° positive)
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, SD Type (7° positive)
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Outer Diameter Bit, CSKP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CSKP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CSRP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CTFP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Outer Diameter Bit, CTGP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DCLN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DCLN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DDJN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DDJN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DTFN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DTFN Type
SUMITOMO ELECTRIC HARDMETAL
Same day or more -
SEC-D Type Bit, DTGN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DWLN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-D Type Bit, DWLN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, ESBN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, ESBN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ESDN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ESDN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ESKN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ESKN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ESSN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-30 Type Bit, ESSN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-30 Type Bit, ETAN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ETAN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-30 Type Bit, ETEN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-30 Type Bit, ETFN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ETFN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-30 Type Bit, ETGN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-M Type Bit, MTJN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-M Type Bit, MWLN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PCBN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PCBN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PCFN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PCFN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PCLN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PDJN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PDJN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PSBN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PSBN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PSDN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PSKN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PSKN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PSSN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PTFN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PTGN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PTTN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PTTN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PWLN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PWLN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-SC Type Bit, SCLC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-SD Type Copying Tool, SDJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-SD Type Copying Tool, SDJC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
CSKN Bit for SEC-Solid Sumiboron
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PRDC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-70 Type Bit, PRGC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Sumiboron Round Tip Bite PRGC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-70 Type Bit, PRGC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Sumiboron Round Tip Bite PRGC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DSDN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, SVJC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, SVJC-X Type
SUMITOMO ELECTRIC HARDMETAL
Same day or more -
CRSN SEC-Solid Sumiboron Bit
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (back face clamp), PCLC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (back face clamp), PCLC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, SCAC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit Offset 0 Holder, SCLC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit Offset 0 Holder, SCLC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit Offset 0 Holder, SDAC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit Offset 0 Holder, SDAC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, SDJC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, SDJC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SWC-SV Type Mini Bit SVLC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (11°positive), SVLP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (11°positive), SVLP Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, SDJC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DVJN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-SV Type Copying Tool, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-SV Type Copying Tool, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-SV Type Copying Tool, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-SV Type Copying Tool, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-SV Type Copying Tool, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-SV Type Copying Tool, SVJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-for Solid Sumiboron Bit (dimple lock type), XCLN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-for Solid Sumiboron Bit (dimple lock type), XSBN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
CRDN Bit for SEC-Solid Sumiboron
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
CSBN Bit for SEC-Solid Sumiboron
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-for Solid Sumiboron Bit, CTGN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DSBN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DSBN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DSSN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-D Type Bit, DSSN Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, PDJC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Sumiboron Round Tip Bite PRDC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Sumiboron Round Tip Bite PRGN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Sumiboron Round Tip Bite PRGN Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (7°positive, back face clamp), PDJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (7°positive, back face clamp), PDJC Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Mini Bit (back face clamp), Offset 0 Holder, PCLC-X Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Adapter (For MAH/MAHP) CGPAD-R/L
ISCAR
45 Day(s) or more -
Adapter (For MAH/MAHP) GAM-N/R/L GAD
ISCAR
45 Day(s) -
Adapter Replacement Holder (for heavy cutting)
ISCAR
45 Day(s) -
Cut Grip Outer Diameter / End Face Processing Holder (Slant Type)
ISCAR
45 Day(s) -
Swiss Cut (for Automatic Lathes), Holder for External Machining SCHL/R-6B
ISCAR
45 Day(s) -
Swiss Turn, Holder for External Machining (for Automatic Lathes) PCLCR/L
ISCAR
45 Day(s) -
Swiss Turn, Holder for External Machining (for Automatic Lathes) PDACR/L
ISCAR
45 Day(s) -
Tool Block SGTBF (Right-Angle Type)
ISCAR
45 Day(s) -
Tool Block SGTBK (Heavy Duty Type)
ISCAR
45 Day(s) -
Tool Block SGTBN
ISCAR
45 Day(s) -
Tool Block SGTBR/L (Simple Mounting Type)
ISCAR
45 Day(s) -
Tool Block SGTBU (Clamp Division Type, CNC Lathe)
ISCAR
45 Day(s) -
Tool Block UBHCR/L
ISCAR
45 Day(s) -
Top Grip, Multifunction Blade
ISCAR
45 Day(s) -
Top Grip, Integral Holder for Multi-functional Machining
ISCAR
45 Day(s) or more -
HELI GRIP, DO-GRIP, Blade for Grooving, Multifunction Machining
ISCAR
45 Day(s) or more -
Heli Turn LD (Laydown) DCLNR/L
ISCAR
45 Day(s) -
Penta IQ Grip, PCHR/L-D-IQ, Grooving and Parting Holders
ISCAR
45 Day(s) -
PENTACUT , Toolholder for Parting, Grooving (Shallow Groove), Multifunctional Tool
ISCAR
45 Day(s) or more -
PENTACUT , Toolholder for Parting, Grooving, Multifunctional Tool (Shallow Groove)
ISCAR
45 Day(s) -
MODULAR-GRIP (PENTACUT Compatible) <24 Types> Adapter (for MAH, MAHP)
ISCAR
45 Day(s) or more -
Outer Diameter / End Surface Machining Holder (without Jaw, for Shallow Grooving max 4 mm) (Straight Type)
ISCAR
45 Day(s) or more -
Outer Diameter / End Surface Machining Holder (for Corner Machining)
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining SSBCR/L, SSSCR/L (Screw Clamp)
ISCAR
Same day or more -
Holder for Outer Diameter Machining (Wedge Clamp) MTJNR/L, MTENN
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining (Wedge Clamp) SVJNR/L-F, SVVNN (Screw Clamp)
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining (Wedge Lock, W Clamp) MWLNR/L-W/SW
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining (Screw Clamp) SCLCR/L
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining (Screw Clamp) SVJCR/L, SVVCN, SVXCR/L
ISCAR
45 Day(s) or more -
Holder for Outer Diameter Machining (Lever Lock Clamp)
ISCAR
45 Day(s) -
Holder for Outer Diameter Machining (Lever Lock Clamp) PWLNR/L (for Outer Diameter, End Surface)
ISCAR
45 Day(s) or more -
Integral Holder for Outer Diameter Machining (Straight Type)
ISCAR
45 Day(s) or more -
Integral Holder for Outer Diameter Machining Cutout, Automatic Lathe for Deep Grooving, for Small Machine (straight type)
ISCAR
45 Day(s) -
Integral Holder for Outer Diameter Machining (Straight Type)
ISCAR
45 Day(s) or more -
Wide Milling Bit Holder (TIGER)
ISCAR
45 Day(s) -
Multi-Functional Blade (Straight Type)
ISCAR
45 Day(s) or more -
Compatible Adapter (for PHA, PHAP)
ISCAR
45 Day(s) -
Model A Negative / Clamp-on Style ACLNR/L
TUNGALOY
45 Day(s) -
Model A Negative / Double Clamp Style ACLNR/L
TUNGALOY
45 Day(s) -
Model A Negative / Double Clamp Style ADJNR/L
TUNGALOY
45 Day(s) -
Model A Negative / Double Clamp Style ASBNR/L
TUNGALOY
45 Day(s) -
Model A Negative / Double Clamp Style ASSNR/L
TUNGALOY
45 Day(s) -
Model A Negative / Double Clamp Style AWLNR/L
TUNGALOY
45 Day(s) -
Model A Negative / Double Clamp Style C-ACLNN
TUNGALOY
3 Day(s) or more -
Model A Negative / Double Clamp Style C-ACLNR/L
TUNGALOY
3 Day(s) or more -
Model A Negative / Double Clamp Style C-ADJNR/L
TUNGALOY
3 Day(s) or more -
Model A Negative / Double Clamp Style C-ADNNN
TUNGALOY
3 Day(s) or more -
Model A Negative / Double Clamp Style C-SVJCR/L
TUNGALOY
3 Day(s) or more -
Type J, Positive / Screw On Type JSDJ2XR/L
TUNGALOY
45 Day(s) -
Type J, Positive / Screw On Type JSWL2XR/L
TUNGALOY
45 Day(s) -
Type J Positive / Rear Clamp Type JPDJ2XR/L
TUNGALOY
45 Day(s) -
Type J Positive / Rear Clamp Type JPWL2XR/L
TUNGALOY
45 Day(s) -
P Type, Negative / Lever Lock PCLNR/L
TUNGALOY
3 Day(s) or more -
P Type, Negative / Lever Lock PSKNR/L
TUNGALOY
3 Day(s) or more -
P Type, Negative / Lever Lock PSSNR/L
TUNGALOY
3 Day(s) or more -
P Type, Negative / Lever Lock Type C-PCLNR/L
TUNGALOY
3 Day(s) or more -
P Type, Negative / Lever Lock Type PDJNR/L
TUNGALOY
45 Day(s) -
P Type, Negative / Lever Lock Type PTGNR/L
TUNGALOY
45 Day(s) -
TUNGROOVE FPGN Type
TUNGALOY
45 Day(s) -
TUNGROOVE SPGN Type
TUNGALOY
45 Day(s) -
Screw Fastening / Clamp On Combined Type C-CER/L
TUNGALOY
3 Day(s) or more -
Outer Diameter Cutting CGEUR/L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting PN/CP/CE/SP
TUNGALOY
3 Day(s) or more -
Square Shank Type TBS1
TUNGALOY
45 Day(s) -
Square Shank Type TBS3
TUNGALOY
45 Day(s) -
Square Shank Type TBS4
TUNGALOY
45 Day(s) -
Round Shank Type TBR1
TUNGALOY
45 Day(s) -
Round Shank Type TBR3
TUNGALOY
45 Day(s) -
Round Shank Type TBR4
TUNGALOY
45 Day(s) -
DCLN Type (Outer Diameter Machining / End Machining)
KYOCERA
3 Day(s) or more -
DDJN Type (Outer Diameter Machining / Profiling)
KYOCERA
3 Day(s) or more -
DDHN Type (Outer Diameter Machining / End Machining / Profiling)
KYOCERA
3 Day(s) or more -
PDJN Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
PDHN Type (External Diameter, End Face, Profiling)
KYOCERA
3 Day(s) or more -
DSBN Type (Outer Diameter Machining)
KYOCERA
3 Day(s) or more -
PSBN Type (Outer Diameter Machining)
KYOCERA
3 Day(s) or more -
PSKN Type (End Face Machining)
KYOCERA
3 Day(s) or more -
PSSN Type (External Diameter, End Face, Chamfering)
KYOCERA
3 Day(s) or more -
PSDN Type (External Diameter, Chamfering)
KYOCERA
3 Day(s) or more -
DTGN Type (Outer Diameter Machining)
KYOCERA
3 Day(s) or more -
PTGN Type (Outer Diameter Machining)
KYOCERA
Same day or more -
WTEN-N Type (outer diameter, chamfer machining)
KYOCERA
3 Day(s) or more -
DVLN Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
DVPN Type (External Diameter, Profiling/Undercutting)
KYOCERA
3 Day(s) or more -
DVVN Type (External Diameter/Profiling)
KYOCERA
Same day or more -
MVLN Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
MVVN Type (External Diameter, Profiling)
KYOCERA
5 Day(s) or more -
PVLN Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
PVPN Type (External Diameter, Copying/Undercutting)
KYOCERA
3 Day(s) or more -
PVVN Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)
KYOCERA
3 Day(s) or more -
DWLN Type (External Diameter/End-Face Machining)
KYOCERA
3 Day(s) or more -
WWLN Type (outer diameter, end surface machining)
KYOCERA
3 Day(s) or more -
CCLN Type (Outer Diameter Machining / End Machining)
KYOCERA
3 Day(s) or more -
CDJN Type (Outer Diameter Machining / Profiling / Boring)
KYOCERA
5 Day(s) or more -
CELN Type (Outer Diameter Machining / End Machining)
KYOCERA
5 Day(s) or more -
CSRN Type (Outer Diameter Machining)
KYOCERA
5 Day(s) or more -
CS-N Type (Outer Diameter Machining)
KYOCERA
9 Day(s) or more -
CSKN Type (End Machining)
KYOCERA
5 Day(s) or more -
CSYN Type (End Machining)
KYOCERA
5 Day(s) or more -
CSSN Type (Outer Diameter Machining / End Machining / Chamfering)
KYOCERA
5 Day(s) or more -
CSDN Type (Outer Diameter Machining / Chamfering)
KYOCERA
5 Day(s) or more -
CTJN Type (Outer Diameter Machining)
KYOCERA
5 Day(s) or more -
CTUN Type (End Machining)
KYOCERA
5 Day(s) or more -
CRSN Type (Outer Diameter Machining / End Machining)
KYOCERA
5 Day(s) or more -
CRDN Type (Outer Diameter Machining / Profiling)
KYOCERA
5 Day(s) or more -
CCRN-A Type (Outer Diameter Machining)
KYOCERA
9 Day(s) or more -
CCLN-A Type (Outer Diameter Machining / End Machining)
KYOCERA
5 Day(s) or more -
CRDN-A Type (Outer Diameter Machining / Profiling)
KYOCERA
5 Day(s) or more -
CRSN-A Type (Outer Diameter Machining / End Machining)
KYOCERA
5 Day(s) or more -
CSKN-A Type (End Machining)
KYOCERA
9 Day(s) or more -
CSRN-A Type (Outer Diameter Machining)
KYOCERA
9 Day(s) or more -
CSDN-A Type (Outer Diameter Machining / Chamfering)
KYOCERA
5 Day(s) or more -
CSSN-A Type (Outer Diameter Machining / End Machining / Chamfering)
KYOCERA
5 Day(s) or more -
CTJN-A Type (Outer Diameter Machining)
KYOCERA
9 Day(s) or more -
PRGC-BE Type (External Diameter Machining)
KYOCERA
9 Day(s) or more -
KTKF Type/KTKF Type Space Holder
KYOCERA
3 Day(s) or more -
AABS-40F Type (Blade Width 2.8 mm / Depth 4 mm MAX)
KYOCERA
5 Day(s) or more -
SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)
KYOCERA
3 Day(s) or more -
AABW-40F Type (Blade Width 4.7 mm / Depth 4 mm MAX)
KYOCERA
5 Day(s) or more -
SABW-40F Type (Cutting Edge Width 4.7 mm, Depth 4 mm Max.)
KYOCERA
3 Day(s) or more -
AABW-50F Type (Blade Width 4.7 mm / 1 Path 5 mm MAX)
KYOCERA
5 Day(s) or more -
SABW-50F Type (Cutting Edge Width 4.7 mm, 1 Pass 5 mm Max.)
KYOCERA
3 Day(s) or more -
SVLP Type (outer diameter, profile machining)
KYOCERA
5 Day(s) or more -
SCLC-FF Type (without Offset) (External Diameter / End Face Machining)
KYOCERA
3 Day(s) or more -
SCLC Type (External Diameter/End-Face Machining)
KYOCERA
3 Day(s) or more -
ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
3 Day(s) or more -
SDXC Type (External Diameter, End Face, Profiling)
KYOCERA
3 Day(s) or more -
SDNC-F Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
SDNC Type (External Diameter, Profiling)
KYOCERA
3 Day(s) or more -
SDLP-FF Type (without Offset) (External Diameter / Profiling)
KYOCERA
5 Day(s) or more -
STGC (P) Type (Outside Diameter Machining)
KYOCERA
3 Day(s) or more -
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
3 Day(s) or more -
SVJP-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
3 Day(s) or more -
SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)
KYOCERA
5 Day(s) or more -
S…SDUC Type (External Diameter, Profiling)
KYOCERA
5 Day(s) or more -
S…SVUB (C) Type (Outer Diameter and Undercutting Machining)
KYOCERA
5 Day(s) or more -
SDLN Type (without Offset) (External Diameter / Profiling)
KYOCERA
5 Day(s) or more -
STLN Type (without offset) (outer diameter, pull end surface machining)
KYOCERA
5 Day(s) or more -
PCLN-FF Type (without Offset) (External Diameter / End Face Machining)
KYOCERA
5 Day(s) or more -
PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)
KYOCERA
3 Day(s) or more -
QS Holding System Stepping CoroTurn 107 Bit
SANDVIK
11 Day(s) or more -
T-Max Shank Bit
SANDVIK
11 Day(s) or more -
Shank Bit for T-Max P Positive Tip
SANDVIK
45 Day(s) -
T-Max P Negative Shank Bit for O.D.
SANDVIK
3 Day(s) or more -
T-Max Shank Bit for Ceramic Tips
SANDVIK
11 Day(s) or more -
CORO-TURN 107 Shank Bit for Positive Tips
SANDVIK
45 Day(s) -
CORO-TURN RC, Shank Bit for Ceramic Tips
SANDVIK
11 Day(s) or more -
COROMANT CAPTO, Cutting Head for CORO-TURN RC Negative Tip
SANDVIK
11 Day(s) or more -
COROMANT CAPTO, Cutting Head for CORO-TURN RC
SANDVIK
11 Day(s) or more -
Cassette Holder for Turning Processing
SANDVIK
5 Day(s) or more -
Shank Bit, Solid Boring Bit, Boring Bit Adapter
SANDVIK
11 Day(s) or more -
Tool Bit for Turning Processing
SANDVIK
11 Day(s) or more -
Shank Tool Bit T-Max P Lever Clamp PCBNR/L
SANDVIK
3 Day(s) or more -
Shank Tool Bit T-Max P Lever Clamp PSKNR/
SANDVIK
12 Day(s) or more -
Shank Tool Bit T-Max P Lever Clamp PSBNR/L
SANDVIK
12 Day(s) or more -
Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L
SANDVIK
12 Day(s) or more -
Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp for Ceramic Inserts, CCRNR/L -4
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C3-MVJNR/L
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-DDHNR/L
SANDVIK
10 Day(s) or more -
T-Max P Cutting Unit For Turning, C-DDJNR/L
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-DDUNR/L
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-DRSNR/L
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-DSDNN
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-PDJNR/L
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-PRSCR/L
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-PSDNN
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP
SANDVIK
12 Day(s) or more -
T-Max P Shank Tool Bit For Turning, R/L170.35
SANDVIK
12 Day(s) or more -
T-Max P Cutting Unit For Turning, C-PRSCR/L
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, 177.9
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, CSBPR/L
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, CSDPR/L
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, CTDPR/L
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, CTFPR/L
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, CTGPR/L
SANDVIK
12 Day(s) or more -
T-Max S Shank Tool Bit For Turning, CTTPR/L
SANDVIK
11 Day(s) or more -
T-Max S Boring Tool Bit For Turning, R/L136.9
SANDVIK
12 Day(s) or more -
T-Max S Cartridge For Turning Tool, CSKPR/L
SANDVIK
12 Day(s) or more -
T-Max Shank Tool Bit For Turning, CSRNR/L
SANDVIK
12 Day(s) or more -
T-Max Shank Tool Bit For Turning, CTGNR/L
SANDVIK
12 Day(s) or more -
CoroTurn HP Cutting Head, CoroTurn 107 Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP
SANDVIK
12 Day(s) or more -
CoroTurn HP Cutting Head, CoroTurn 107 Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP
SANDVIK
6 Day(s) or more -
CoroTurn RC Double Clamp, DSSNR/L
SANDVIK
6 Day(s) or more -
CoroTurn 107 Cutting Unit For Turning, C-SRDCN
SANDVIK
12 Day(s) or more -
CoroTurn 107 Cutting Unit For Turning, C-SVJBR/L
SANDVIK
12 Day(s) or more -
CoroTurn 107 Cutting Unit For Turning, C-SVJBR/L-16HP
SANDVIK
12 Day(s) or more -
CoroTurn 107 Cutting Unit For Turning, C-SVVBN
SANDVIK
12 Day(s) or more -
CoroTurn HP SL Cutting Head, T-Max P Lever Clamp, For Outer Diameter Turning, SL-PDJNR/L-HP
SANDVIK
12 Day(s) or more -
CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X
SANDVIK
12 Day(s) or more -
CoroTurn HP Cutting Head, Outer Diameter Turning – Tool Bit For Negative Inserts, C-PDUNR/L-HP
SANDVIK
6 Day(s) or more -
CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP
SANDVIK
6 Day(s) or more -
CoroPlex TT Multi-Function Turning Tool, C-TB-CN
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRDCN
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSCR/L
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL
SANDVIK
6 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CCLNR/L -4
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CDJNR/L -4
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, DCLNR/L -2
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, DDJNR/L -2
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, DSDNN -2
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Unit, T-Max M Top Clamp, MVJNR/L
SANDVIK
12 Day(s) or more -
Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12
SANDVIK
12 Day(s) or more -
Coromant Capto, CoroTurn HP Cutting Head, Tool for B-Shaft 45°, Lever Clamp, C-PCMNN-HP
SANDVIK
12 Day(s) or more -
Coromant Capto, CoroTurn HP Cutting Head, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP
SANDVIK
12 Day(s) or more -
Coromant Capto, CoroTurn HP Cutting Head, Lever Clamp, High Pressure Coolant Specification, C-PCMNN-HP
SANDVIK
12 Day(s) or more -
Coromant Capto, CoroTurn HP Cutting Head, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP
SANDVIK
12 Day(s) or more -
Coromant Capto, CoroTurn HP Cutting Head, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP
SANDVIK
12 Day(s) or more -
Shank Tool Bit, CoroTurn RC Double Clamp, DSKNR/L
SANDVIK
6 Day(s) or more -
Shank Tool Bit, CoroTurn RC Double Clamp For Ceramic Inserts, DCBNR/L-2
SANDVIK
12 Day(s) or more -
Shank Tool Bit, CoroTurn RC Double Clamp For Ceramic Inserts, DCLNR/L -2
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR/L-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDACR/L-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L
SANDVIK
4 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR/L -4
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, DSBNR/L -2
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP
SANDVIK
17 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PCLNR/L-HP
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PCRNR/L-HP
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, High Pressure Coolant Specification, C-PSKNR/L-HP
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDHNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDJNR/L
SANDVIK
5 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDNNN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DRSNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSDNN
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSKNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSRNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSSNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DVVNN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DWLNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Wedge Clamp, MTJNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Wedge Clamp, MWLNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PCRNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PDJNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PRDCN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PSDNN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PSSNR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCBNR/L
SANDVIK
45 Day(s) -
Outer Diameter Turning – Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L
SANDVIK
11 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDHNR/L
SANDVIK
45 Day(s) -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN
SANDVIK
5 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L
SANDVIK
6 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L
SANDVIK
6 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN
SANDVIK
5 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L
SANDVIK
5 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L
SANDVIK
6 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR/L
SANDVIK
6 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DVPNR/L
SANDVIK
6 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Cutting Head, CoroTurn 107 Screw Clamp, SVHBR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN
SANDVIK
4 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SCLCR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SDJCR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SDNCN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SVVBN
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Positive Inserts, TR-V13JBR/L
SANDVIK
4 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CSSNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CTGNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, PRGNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MWLNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS HP Holding System, QS-SCLCR/L..HP
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SCACR
SANDVIK
11 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Small Lathes, Short Tool Bit For QS Holding System, QS- SCLCR
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Small Lathes, Short Tool Bit For QS Holding System, QS- SCLCR-HP
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDJCR
SANDVIK
11 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SDJCR-HP
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- STJCR
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVJBR/L
SANDVIK
6 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Small Lathes, Short Tool Bit For QS Holding System, QS- SVJCR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Small Lathes, Short Tool Bit For QS Holding System, QS- SVVBN
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning, Shank Tool Bit For Small Lathes, CoroTurn 107 Screw Clamp, SVABR/L -S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R/L170.5
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CSDNN -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CSKNR/L -4
SANDVIK
12 Day(s) or more -
Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CSRNR/L -4
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Ceramic Inserts, T-Max Ceramic Top Clamp, CRDCR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Ceramic Inserts, T-Max Ceramic Top Clamp, CRSNR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR/L
SANDVIK
5 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTFNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR/L
SANDVIK
6 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13NCN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13MBL
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13VBN
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Shank Tool Bit, CoroTurn 107 Screw Clamp, STFCR/L
SANDVIK
12 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, STGCR/L
SANDVIK
11 Day(s) or more -
Outer-Diameter Turning – Shank Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, STJCR/L-S
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Shank Tool Bit, CoroTurn 107 Screw Clamp, STTCR/L
SANDVIK
12 Day(s) or more -
Outer Diameter Turning – Tool Bit For Positive Inserts, Shank Tool Bit, CoroTurn 107 Screw Clamp, SVJBR/L-S
SANDVIK
12 Day(s) or more -
Heavy Cutting, High Precision Bar Peeling Holder
SANDVIK
12 Day(s) or more -
Heavy Cutting, High Precision Bar Peeling Holder
SANDVIK
12 Day(s) or more -
Heavy Cutting – Railway Wheel Correction Turning, Holder For Cutting Head, For Single Blade, L175.32-M
SANDVIK
12 Day(s) or more -
Heavy Turning, Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSKNR/L
SANDVIK
12 Day(s) or more -
Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto T-Max P- Lever Clamp, PRSCR/L
SANDVIK
12 Day(s) or more -
Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto, DSSNR/L
SANDVIK
12 Day(s) or more -
Multi-Function Tool CoroPlex TT Twin Tool, CoroTurn RC Double Clamp, C-T-DCL/M
SANDVIK
12 Day(s) or more -
Iscar, X, Lathe/Holder
ISCAR
45 Day(s) -
Iscar, X, Lathe/Holder
ISCAR
45 Day(s) -
Iscar, X, Lathe/Holder
ISCAR
45 Day(s) -
Sandvik COROMANT CAPTO CoroTurn RC Cutting Head
SANDVIK
45 Day(s) -
Sandvik CoroTurn RC Negative Tip Shank Bit
SANDVIK
45 Day(s) or more -
Sandvik CoroTurn RC Negative Tip Shank Bit
SANDVIK
45 Day(s) -
Sandvik T-Max P Negative Tip Shank Bit
SANDVIK
Quote -
Sandvik CoroTurn RC Negative Tip Shank Bit
SANDVIK
5 Day(s) or more -
Sandvik T-Max S Top Clamp Shank Bit
SANDVIK
5 Day(s) or more -
Sandvik T-Max P Negative Tip Shank Bit
SANDVIK
45 Day(s) -
Sandvik CoroTurn 107 Positive Tip Shank Bit
SANDVIK
45 Day(s) -
Sandvik O.D. CoroTurn 107 I.D. Right-Handed
SANDVIK
45 Day(s) -
Iscar, X, ISO Lathe/Holder
ISCAR
45 Day(s) -
Iscar, X, Lathe/Holder
ISCAR
45 Day(s) -
Iscar, X, ISO Lathe/Holder
ISCAR
45 Day(s) -
Iscar, X, Lathe/Holder
ISCAR
45 Day(s) -
Sandvik CoroTurn 107 Positive Tip Shank Bit
SANDVIK
45 Day(s) -
Tungsten Alloy O.D. TAC Bit
TUNGALOY
45 Day(s) -
Tungsten Alloy TAC Square Bit
TUNGALOY
45 Day(s) -
Tungsten Alloy TAC Round Bit
TUNGALOY
45 Day(s) -
Outer Diameter Holder, CCBN Type (Outer Diameter Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CCKN Type (End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CCLN Type (Outer Diameter / End Surface Machining)
KYOCERA
6 Day(s) or more -
Outer Diameter Holder, CDHN Type (Outer Diameter / Profiling/Pulling Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CDJN Type (Outer Diameter / Profiling Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CDNN Type (Outer Diameter / Profiling Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CRDN Type (Outer Diameter / Profiling Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CRSN Type (Outer Diameter / End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CRDN-09 Type (Outer Diameter / Profiling Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CRSN-09 Type (Outer Diameter / End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder CSDN Type (Outer Diameter / Chamfering Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CSKN Type (End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CSRN Type (Outer Diameter Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder CSSN Type (Outer Diameter / End Surface / Chamfering Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CSXN Type (Outer Diameter Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CSYN Type (End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CSXN-09 Type (Outer Diameter Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CSYN-09 Type (End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CTFN Type (End Surface Machining)
KYOCERA
10 Day(s) or more -
Outer Diameter Holder, CTGN Type (Outer Diameter Machining)
KYOCERA
10 Day(s) or more -
Holder For Front-Turning, PTXN-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, CSV-NC/CSV-NC-F
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVJC-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-PTX
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, TB-F
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, TB-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SDU
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SDU-ACH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SDX
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SCL
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SVX
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVVCR/L-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, PSDN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SDXC-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, GTT
NTK CUTTING TOOLS
4 Day(s) or more -
Holder For Back-Turning, GTT-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, CH-GTT
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, Y-GTT-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SVXP
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C17
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C15
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C12/CSSN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C14/CSDN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C13
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C11
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C16
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, CSHN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, PSBN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C21
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C22
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, PTLN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, TTGN/WTGN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C23
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C24
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C25
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, TTFN/WTFN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C31/CCLN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, CCBN/CCKN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, TCBN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WCBN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, PDJN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, HDJN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WDHN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, HDHN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WDNN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, HDNN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C54/CRDN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, C55/CRGN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, TSDN/WSDN/HSDN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, TSSN/WSSN/HSSN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WVJN/HVJN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WVPN/HVPN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WVVNN/HVVNN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, DS-TBP
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, TBP
NTK CUTTING TOOLS
4 Day(s) or more -
Holder For Back-Turning, TBP-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, Y-TBP-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, TFT
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SDJC-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SDJC-N-F
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SDQC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, CH-SDUC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, Y-SDJC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, Y-SDJC-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVQP-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, CH-SVUP
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SVVP-ACH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, CH-STUC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, WWLN/WWLN-2
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SCLC-N
NTK CUTTING TOOLS
4 Day(s) or more -
Holder For Front-Turning, SCLC-N-F
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SCLC-OH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVQC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-PTX-ACH
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, BACK DUO TBDP
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, CRDC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, CRXC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, CH-TBPA
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, CH-SVXCL
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, Y-SVXCL
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SCLC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Roll And Heat-Resistant Alloy Machining, HRCD
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, CSV
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SCAC-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, Y-SDNC, Y Axis Holder
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVAC-N
NTK CUTTING TOOLS
4 Day(s) or more -
Holder For Front-Turning, SVAC-NW
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVAC-W
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVXC-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, DS-SVVP
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, SVXP-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, PTAN-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, PCLN
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, PCLN-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Front-Turning, PDJN-N
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, Y-TBP
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, TBVC
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, TBT
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, DS-GTT
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Back-Turning, Y-GTT
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Outer Diameter Machining, CTPS
NTK CUTTING TOOLS
6 Day(s) or more -
Holder For Pipe Bead Machining, ATS
NTK CUTTING TOOLS
6 Day(s) or more -
C Style Clamping Tool Holder For Negative Inserts CCLN-MN 95°
WIDIA
23 Day(s) or more -
C Style Clamping Tool Holder For Negative Inserts CCLN-MX 95°
WIDIA
23 Day(s) or more -
C Style Clamping Tool Holder For Negative Inserts CDJN-MN 93°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PCBN 75°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PCKN 75°
WIDIA
13 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PDJN 93°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PDNN 62.5°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PSBN 75°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PSDN 45°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PSKN 75°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PSSN 45°
WIDIA
23 Day(s) or more -
P Style Clamping Tool Holder For Negative Inserts PWLN 95°
WIDIA
13 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SDJC 93°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SDNC 62.5°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SRDC
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SSBC 75°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SSSC 45°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts STFC 90°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SVHB 107.5°
WIDIA
23 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SVJB 93°
WIDIA
13 Day(s) or more -
S Style Screw Clamp Tool Holder For Positive Inserts SVVB 72.5°
WIDIA
23 Day(s) or more -
Small Tool Holder Clamping System S 90°, Tool Holder CC
WIDIA
23 Day(s) or more -
Small Tool Holder Clamping System S 53°, Tool Holder CC
WIDIA
23 Day(s) or more -
Small Tool Holder Clamping System S 45°, Boring Bar SC
WIDIA
23 Day(s) or more -
Small Tool Holder Clamping System S 50°, Boring Bar CC
WIDIA
23 Day(s) or more -
Small Tool Holder Clamping System S 590°, Boring Bar CC
WIDIA
23 Day(s) or more -
Small Tool Holder Clamping System S 590°, Boring Bar TC
WIDIA
23 Day(s) or more -
Holder For Front-Turning, SVVCN
NTK CUTTING TOOLS
6 Day(s) or more -
บริหารงานและให้บริการโดย ทีมวิศวกรอาชีพ ครับผม
Contract Us ( ขอใบเสนอราคา หรือ ติดต่อสั่งซื้อสินค้าได้ที่นี่ครับ )
ติดต่อ คุณอ้น
โทรศัพท์ 098-2467624 หรือ 089-6086450
E-mail : thebest.td9@gmail.comLine iD : www.Amata-Spare.com
บริษัท เดอะเบสท์เทรดเดอร์แอนด์เซอร์วิส จำกัด
The best trader and service Co.,Ltd
Design by คุณอ้น • Powered by www.Amata-Spare.com Copyright© สงวนลิขสิทธิ์ เนื้อหาทั้งหมดภายในเว็บไซต์นี้ห้ามมิให้นำไปใช้ในเชิงพาณิชย์ หากฝ่าฝืนทางเราจะดำเนินคดีตามกฎหมาย
-
-
-
-
-
-
