บริหารงานและให้บริการโดย ทีมวิศวกรอาชีพ ครับผม
Contract Us ( ขอใบเสนอราคา หรือ ติดต่อสั่งซื้อสินค้าได้ที่นี่ครับ )
ติดต่อ คุณอ้น
โทรศัพท์ 098-2467624 หรือ 089-6086450
E-mail : thebest.td9@gmail.com
Line iD : www.Amata-Spare.com
บริษัท เดอะเบสท์เทรดเดอร์แอนด์เซอร์วิส จำกัด
The best trader and service Co.,Ltd
-
Small Bore End Surface Slotting Series, Model VNFG (System Bar)
KYOCERA
1 Day(s) or more -
Multi-Functional / Grooving (Cutting-Off) Chip GMM Type
KYOCERA
Same day or more -
Lathe Turning (Cutter) Bit GDM Model
KYOCERA
1 Day(s) or more -
Slit Tip GDM Type
KYOCERA
1 Day(s) or more -
Cutter Holder TKN Type
KYOCERA
Same day or more -
Multi-Functional / Grooving Holder KGM Type
KYOCERA
3 Day(s) or more -
Lathe Turning Bit TGF
KYOCERA
1 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM Model
KYOCERA
Same day or more -
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
1 Day(s) or more -
Small Bore Slotting Holder [for GV Tip]
KYOCERA
3 Day(s) or more -
Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)
KYOCERA
3 Day(s) or more -
Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)
KYOCERA
3 Day(s) or more -
Multi-Functional / Grooving (Cutting-Off) Chip GMG Type
KYOCERA
1 Day(s) or more -
Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)
KYOCERA
3 Day(s) or more -
Grooved End Face Blade KGDF Type
KYOCERA
3 Day(s) or more -
SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type
SUMITOMO ELECTRIC HARDMETAL
Same day or more -
SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type
SUMITOMO ELECTRIC HARDMETAL
Same day or more -
Outer Diameter Shallow Groove Holder KGBA Type
KYOCERA
3 Day(s) or more -
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type
KYOCERA
3 Day(s) or more -
Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)
KYOCERA
3 Day(s) or more -
Small Bore Slotting System Bar, Model VNG
KYOCERA
3 Day(s) or more -
Inner Diameter Shallow Groove Holder KIGBA Type
KYOCERA
3 Day(s) or more -
Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)
KYOCERA
3 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS-8 Type
KYOCERA
6 Day(s) or more -
Slit Tip (For Small Diameters) TKF Type【1-10 Pieces Per Package】
KYOCERA
1 Day(s) or more -
Cutter Holder (for Sub Spindle Small Diameter) KTKFS Type
KYOCERA
5 Day(s) or more -
CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2
SANDVIK
6 Day(s) or more -
CFGS/CFGT Bit for End Face Grooving CFGS
TUNGALOY
45 Day(s) -
SEC-Grooved Bit (for outer diameter multi-functional groove, lateral feed, copying) GNDM Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Grooved Bit (for small diameter inner diameter groove) SGIT Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Semi Boron Grooving Tool for Hardened Steel, Model GWB
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type
KYOCERA
4 Day(s) or more -
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type
KYOCERA
4 Day(s) or more -
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip
KYOCERA
Same day or more -
Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve
KYOCERA
3 Day(s) or more -
Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)
KYOCERA
1 Day(s) or more -
Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)
KYOCERA
1 Day(s) or more -
Lathe Turning/Cutting Holder KGD Model (Combination)
KYOCERA
Same day or more -
CoroCut 1/2 Plunging Blade
SANDVIK
6 Day(s) or more -
CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2
SANDVIK
5 Day(s) or more -
CoroTurn SL70 Cutting Head With Coupling, Blade For Grooving, SL70-R/L123…B-HP
SANDVIK
5 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
3 Day(s) or more -
SGT Type Bite for Outer Diameter Grooving SGT
TUNGALOY
45 Day(s) -
GY Modular Blade (External Diameter 00° Straight Holder)
MITSUBISHI MATERIALS
3 Day(s) or more -
SEC-Grooved Bit (for deep tip surface groove) GMFWS Type
SUMITOMO ELECTRIC HARDMETAL
5 Day(s) or more -
SEC-Grooved Bit (for inner diameter shallow groove) GWCI Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type
ISCAR
45 Day(s) or more -
Grooving Blade FLR/L
TUNGALOY
45 Day(s) -
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type
KYOCERA
6 Day(s) or more -
Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
4 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMN Model
KYOCERA
3 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)
KYOCERA
3 Day(s) or more -
Small Bore Slotting Tip Bar, Model PSG-S (Tip Bar)
KYOCERA
3 Day(s) or more -
Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type
KYOCERA
3 Day(s) or more -
KGDF Type End Face Grooving GDFM/GDFMS Types
KYOCERA
1 Day(s) or more -
Grooved End Face Holder (Split Type) KGDF Type
KYOCERA
5 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS Type
KYOCERA
3 Day(s) or more -
Multi-Functional / End Face Grooving Holder Compatible Tip
KYOCERA
1 Day(s) or more -
Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type
KYOCERA
4 Day(s) or more -
Slit Tip GDG Type
KYOCERA
5 Day(s) or more -
Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
6 Day(s) or more -
Slit Tip GMM Type
KYOCERA
3 Day(s) or more -
Cutting Blade for T-Max Q-Cutter
SANDVIK
3 Day(s) or more -
CoroCut 1/2 Plunging/Grooving Shank Bit
SANDVIK
5 Day(s) or more -
CORO-TURN SL70, HP Cutting Head for Grooving
SANDVIK
4 Day(s) or more -
CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123
SANDVIK
12 Day(s) or more -
T-Max Q-Cut Coromant Capto Cutting Unit C-R/LF151.23
SANDVIK
11 Day(s) or more -
CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LF123
SANDVIK
11 Day(s) or more -
CoroCut MB Adapter (Cylindrical Shank) Steel Tool Bit, Internally Lubricated, MB-A-R
SANDVIK
6 Day(s) or more -
Sandvik T-Max Q-Cut Plunging/Grooving Boring Bit
SANDVIK
5 Day(s) or more -
Iscar, W, HF End Groove/Holder
ISCAR
45 Day(s) -
Holder For Grooving NGTB
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off NTGW
NTK CUTTING TOOLS
5 Day(s) or more -
My-T FLEX Series for Outer Diameter Grooving CGWS-FL
TUNGALOY
45 Day(s) -
3-Corner, Model SGT Tool Bit SGT
TUNGALOY
45 Day(s) -
3-Corner, Model TGTS/TGTT Tool Bit TGTS
TUNGALOY
45 Day(s) -
3-Corner, Model TGTS/TGTT Tool Bit TGTT
TUNGALOY
45 Day(s) or more -
Type GX Tool Bit GX-F
TUNGALOY
45 Day(s) -
My-T Series Shank CGWS
TUNGALOY
45 Day(s) -
My-T Series Shank CGWT
TUNGALOY
45 Day(s) -
GX Type Bite for Outer Diameter Grooving GX-E
TUNGALOY
45 Day(s) -
My-T CGD Series for Outer Diameter Grooving CGWS-CGD
TUNGALOY
45 Day(s) -
My-T G Series for Outer Diameter Grooving CGSS-D
TUNGALOY
45 Day(s) or more -
My-T G Series for Outer Diameter Grooving CGWS-G
TUNGALOY
45 Day(s) -
My-T G Series for Outer Diameter Grooving CGWS-W
TUNGALOY
45 Day(s) -
My-T G Series for Outer Diameter Grooving CGWS-WG
TUNGALOY
45 Day(s) -
My-T G Series for Outer Diameter Grooving CGWS-WG-L
TUNGALOY
45 Day(s) -
My-T G Series for Outer Diameter Grooving CGWS-W-L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CAER/L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CAFR/L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CGER/L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CGP
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CHFVR/L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CHSR/L
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CTBF
TUNGALOY
45 Day(s) -
Outer Diameter Cutting CTER/L
TUNGALOY
45 Day(s) -
End Face Cutting CTFR/L
TUNGALOY
45 Day(s) -
Bit For Grooving, Tung Cut JCTER/L
TUNGALOY
45 Day(s) -
J Series for Small Lathes JCCWS
TUNGALOY
45 Day(s) -
J Series for Small Lathes JCGWS
TUNGALOY
45 Day(s) -
J Series for Small Lathes JS-TGL3
TUNGALOY
45 Day(s) -
J Series for Small Lathes JSVG
TUNGALOY
45 Day(s) -
Dedicated Plunging/Grooving Tool CTBN
TUNGALOY
45 Day(s) or more -
Dedicated Plunging/Grooving Tool CTBR/L
TUNGALOY
45 Day(s) -
Dedicated Plunging/Grooving Tool CTH
TUNGALOY
45 Day(s) -
Dedicated Plunging/Grooving Tool CTS
TUNGALOY
45 Day(s) -
CFGS/CFGT Bit for End Face Grooving CFGT
TUNGALOY
45 Day(s) -
My-T FLEX Series for End Face Grooving CGWS-FL
TUNGALOY
45 Day(s) -
Cutting/Grooving CTW Type Bit CTW
TUNGALOY
45 Day(s) -
For Cutting, My-T G Series CCBS
TUNGALOY
45 Day(s) or more -
For Cutting, My-T G Series CCH
TUNGALOY
45 Day(s) or more -
For Cutting, My-T G Series JCGSS
TUNGALOY
45 Day(s) or more -
CGX Type Bit for Inner Diameter Grooving CGX
TUNGALOY
45 Day(s) -
GX-I Type Bit for Inner Diameter Grooving GX-I
TUNGALOY
45 Day(s) -
My-T G Series for Inner Diameter Grooving CGT
TUNGALOY
45 Day(s) -
SNS/CNG Type Bit for Inner Diameter Grooving CNG
TUNGALOY
45 Day(s) or more -
SNS/CNG Type Bit for Inner Diameter Grooving SNG
TUNGALOY
45 Day(s) -
Inner Diameter Cutting CTIR/L
TUNGALOY
45 Day(s) or more -
DPT4 D Type Boring Head for Inner Diameter Grooving
MITSUBISHI MATERIALS
6 Day(s) or more -
MG Bit for Outer Diameter Grooving
MITSUBISHI MATERIALS
3 Day(s) or more -
SMGH, SMG Bit, with Outer Diameter Groove, for Threading
MITSUBISHI MATERIALS
3 Day(s) or more -
UGH UG Bit, for Outer Diameter Bore and Groove
MITSUBISHI MATERIALS
3 Day(s) or more -
Sticky Twin
MITSUBISHI MATERIALS
3 Day(s) or more -
MG for Combined Machining, for Grooving
MITSUBISHI MATERIALS
6 Day(s) or more -
Arbor for D Type Boring Head
MITSUBISHI MATERIALS
3 Day(s) or more -
GY Modular Blade
MITSUBISHI MATERIALS
3 Day(s) or more -
GY Modular Blade (Internal Diameter 90° Straight Holder)
MITSUBISHI MATERIALS
3 Day(s) or more -
UGHN UG Bit (Blade) for Outer Diameter Bore and Groove
MITSUBISHI MATERIALS
3 Day(s) or more -
GY Modular Blade (External Diameter 90° Straight Holder)
MITSUBISHI MATERIALS
4 Day(s) or more -
SEC-Grooved Bit (for outer diameter L type lateral groove) GNDLS Type
SUMITOMO ELECTRIC HARDMETAL
5 Day(s) or more -
SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type
SUMITOMO ELECTRIC HARDMETAL
5 Day(s) or more -
SEC-Grooved Bit (for outer diameter L type shallow groove) GWCSI Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Grooved Bit (for outer diameter shallow groove) SGE Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
SEC-Grooved Bit (for tip surface groove) GNDF Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
SEC-Grooved Bit (for deep tip surface groove) GMFW Type
SUMITOMO ELECTRIC HARDMETAL
5 Day(s) or more -
SEC-Grooved Bit (for deep tip surface groove) GMF Type
SUMITOMO ELECTRIC HARDMETAL
5 Day(s) or more -
SEC-Small Diameter Perforating Bit, SCT Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Sumiboron Grooved Bite BNGG Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Tsukkirukun WCFS Type
SUMITOMO ELECTRIC HARDMETAL
4 Day(s) or more -
Tsukkirukun Jr STFH Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Tsukkirukun Jr STFS Type
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Tool Block (for UG Bits)
MITSUBISHI MATERIALS
3 Day(s) or more -
Self Grip (F Cut) Exchangeable Blade Type Holder Blade
ISCAR
45 Day(s) -
Self Grip (F Cut) Blade for Plunging
ISCAR
45 Day(s) -
Self Grip (F Cut) Blade for Plunging, Integrated Holder, General Purpose, for NC Lathe (Jet Cut), for Automatic Lathe
ISCAR
45 Day(s) -
Self Grip (F Cut) Blade for Plunging, Integrated Holder, for General Purpose Lathe, Strengthened Type
ISCAR
45 Day(s) -
Self Grip (T Cut) Blade for Plunging
ISCAR
45 Day(s) or more -
Tang Grip, Blade for Cutting Protrusions and Grooving
ISCAR
45 Day(s) -
Tang Grip, Integrated Holder for Cutting Protrusions and Grooving
ISCAR
45 Day(s) -
Tang Grip / Self Grip Spare Blade Holder
ISCAR
45 Day(s) or more -
Do-Grip Automatic Plate for Small Components
ISCAR
45 Day(s) or more -
Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)
ISCAR
45 Day(s) or more -
Do-Grip Integrated Holder for Cutting Protrusions
ISCAR
45 Day(s) or more -
HELI GRIP, Outer Diameter Machining Integrated Holder
ISCAR
45 Day(s) or more -
MODULAR-GRIP (DO-GRIP/HELI-GRIP Compatible) Holder for Adapter Replacement (Straight Type)
ISCAR
45 Day(s) or more -
Modular Grip (DO-Grip, Heli-Grip Compatible), Replaceable Adapter Holder (Straight Type) Adapter HGPAD-R/L
ISCAR
45 Day(s) -
Modular Grip (DO-Grip, Heli-Grip Compatible), Replaceable Adapter Holder (Straight Type) Adapter DGAD/HGAD
ISCAR
45 Day(s) -
TUNGCUT Outer Diameter Grooving SGN
TUNGALOY
3 Day(s) or more -
Horizontal Type C-CHFVR/L
TUNGALOY
4 Day(s) or more -
Outer Diameter Groove Cutting STC
TUNGALOY
45 Day(s) -
For Outer Diameter Grooving CGSS
TUNGALOY
45 Day(s) -
For Outer Diameter Grooving ETER/L
TUNGALOY
4 Day(s) or more -
Blade for Outer Diameter Grooving CGDR/L
TUNGALOY
45 Day(s) -
Blade for Outer Diameter Grooving CGWS/CGWT
TUNGALOY
45 Day(s) -
Blade for Outer Diameter Grooving CGWS-G/CGWT-G
TUNGALOY
45 Day(s) -
Bit Set for Inner Diameter Grooving CGWTR/L
TUNGALOY
45 Day(s) -
Vertical Type C-CHSR/L
TUNGALOY
4 Day(s) or more -
End Face Grooving Cutting CTFVR/L
TUNGALOY
45 Day(s) -
End Face Grooving Cutting ETFR/L
TUNGALOY
45 Day(s) or more -
End Face Grooving Cutting JBFR/L
TUNGALOY
45 Day(s) or more -
End Face Grooving Cutting JBSR
TUNGALOY
45 Day(s) -
End Face Grooving Blade FBR/L
TUNGALOY
45 Day(s) -
Inner Diameter / 45° Chamfer Cut JBCR
TUNGALOY
45 Day(s) -
Inner Diameter Grooving Cut JBGR/L
TUNGALOY
45 Day(s) -
Bit for Inner Diameter Grooving CGWT
TUNGALOY
45 Day(s) -
Outer Diameter Shallow Groove Holder KGBAS Type
KYOCERA
3 Day(s) or more -
Outer Diameter Shallow Groove Holder [for TGF Chip] KTGF-F Type (without Offset)
KYOCERA
4 Day(s) or more -
Outer Diameter Shallow Groove Holder [for TGF Chip] KTGF Type (with Offset)
KYOCERA
3 Day(s) or more -
Outer Diameter Shallow Groove Holder [for TGF Chip] S-KTGF Type (Sleeve Holder)
KYOCERA
5 Day(s) or more -
Outer Diameter Shallow Groove Holder [for TG Chip] KTG Type
KYOCERA
4 Day(s) or more -
Lathe Turning (Cutter) Bit GDG Model
KYOCERA
1 Day(s) or more -
Lathe Turning (Cutter) Bit GDMS Model
KYOCERA
4 Day(s) or more -
Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)
KYOCERA
3 Day(s) or more -
Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
4 Day(s) or more -
Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
3 Day(s) or more -
KGDS-S Type Blade for Grooving/Plunging
KYOCERA
3 Day(s) or more -
Multi-Functional / Grooving (Cutting-Off) Chip FGG Type
KYOCERA
3 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model
KYOCERA
4 Day(s) or more -
Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type
KYOCERA
5 Day(s) or more -
Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)
KYOCERA
4 Day(s) or more -
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type
KYOCERA
3 Day(s) or more -
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type
KYOCERA
6 Day(s) or more -
Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)
KYOCERA
6 Day(s) or more -
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
3 Day(s) or more -
Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
6 Day(s) or more -
Large Inner Diameter Deep Grooved Holder [For TG Tip] Compatible Chip
KYOCERA
3 Day(s) or more -
Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type
KYOCERA
3 Day(s) or more -
Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving )
KYOCERA
4 Day(s) or more -
Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type
KYOCERA
3 Day(s) or more -
Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip
KYOCERA
3 Day(s) or more -
Small Bore End Surface Slotting, EZ Bar Conforming Tip
KYOCERA
3 Day(s) or more -
Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar)
KYOCERA
3 Day(s) or more -
Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)
KYOCERA
3 Day(s) or more -
Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)
KYOCERA
4 Day(s) or more -
Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS – AA
KYOCERA
3 Day(s) or more -
Lathe Turning Bit Compatible Bit
KYOCERA
1 Day(s) or more -
Grooved End Face Blade KFTB-S Type
KYOCERA
3 Day(s) or more -
Compatible Chip for Grooved End Face Blade
KYOCERA
3 Day(s) or more -
Slit Tip GDMS Type
KYOCERA
3 Day(s) or more -
Slit Tip KGD Type (for Automatic Plate)
KYOCERA
3 Day(s) or more -
Cutter Holder TKR/L Type
KYOCERA
3 Day(s) or more -
Punching Blade KTKB-SS Type
KYOCERA
Same day or more -
Punching Blade KTKB-S Type
KYOCERA
3 Day(s) or more -
Tool Block for Holding Blade, KTKTB Type (Split Type)
KYOCERA
3 Day(s) or more -
Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)
KYOCERA
6 Day(s) or more -
Cutter Holder (Integrated Type) KTKH-S Type
KYOCERA
3 Day(s) or more -
QS Holding System for CoroCut XS Bit
SANDVIK
12 Day(s) or more -
T-Max Q-Cut Tool Block
SANDVIK
6 Day(s) or more -
T-Max Q-Cut Shank Bit for End Surface Grooving
SANDVIK
5 Day(s) or more -
T-Max Q-Cut Boring Bit for End Surface Grooving
SANDVIK
6 Day(s) or more -
T-Max Q-Cut Plunging/Grooving Cutting Head Type 570
SANDVIK
6 Day(s) or more -
T-Max Q-Cut Plunging/Grooving Shank Bit
SANDVIK
5 Day(s) or more -
T-Max Q-Cut Shank Bit for Plunging/Grooving
SANDVIK
6 Day(s) or more -
CoroCut 1/2 Plunging/Grooving Boring Bit
SANDVIK
6 Day(s) or more -
CoroCut 1/2 Profile Machining Shank Bit
SANDVIK
12 Day(s) or more -
CoroCut 3 Plunging/Grooving Shank Bit
SANDVIK
12 Day(s) or more -
CORO-TURN SL70, HP Cutting Head
SANDVIK
12 Day(s) or more -
CORO-TURN SL70, HP Cutting Head for Edge Grooving
SANDVIK
12 Day(s) or more -
COROMANT CAPTO, Cutting Unit for CoroCut 1 & 2
SANDVIK
12 Day(s) or more -
CoroCut, Q Cut, Blade/Adapter
SANDVIK
12 Day(s) or more -
CORO-TURN XS, CoroCut XS, CoroCut MB Holder
SANDVIK
45 Day(s) -
CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank
SANDVIK
6 Day(s) or more -
Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving
SANDVIK
11 Day(s) or more -
CoroCut 1/2 Shank Tool Bit For Face Grooving
SANDVIK
5 Day(s) or more -
CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123
SANDVIK
12 Day(s) or more -
CoroCut 1/2 Shank Tool Bit For Profiling R/LX123…-070
SANDVIK
5 Day(s) or more -
Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF
SANDVIK
11 Day(s) or more -
Short Tool Bit For QS Holding System, For Turning, Parting, Grooving & Threading QS-SMALR/L-HP
SANDVIK
12 Day(s) or more -
Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF
SANDVIK
11 Day(s) or more -
Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123
SANDVIK
11 Day(s) or more -
Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool, CoroCut 1/2 Screw Clamp QS-R/LF123
SANDVIK
5 Day(s) or more -
T-Max Q-Cut SL (Type 151.3) Blade For End Surface Grooving 570-R/L151.3-A
SANDVIK
11 Day(s) or more -
T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L
SANDVIK
5 Day(s) or more -
CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T
SANDVIK
11 Day(s) or more -
CoroCut MB Shank Tool Bit For Machining Outer Diameters MB-R/L
SANDVIK
11 Day(s) or more -
CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123
SANDVIK
6 Day(s) or more -
CoroCut 1/2 Coromant Capto Cutting Unit, Screw Clamp, C-R/LF123
SANDVIK
12 Day(s) or more -
CoroCut 1/2 Shank Tool Bit For Face Grooving, Screw Clamp, R/LG123
SANDVIK
6 Day(s) or more -
CoroCut 1/2 Head For Grooving End Surfaces 570
SANDVIK
11 Day(s) or more -
CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007
SANDVIK
11 Day(s) or more -
CoroCut 1/2 Shank Tool Bit For Profiling, Screw Clamp, R/LX123-070
SANDVIK
5 Day(s) or more -
CoroCut 1/2 Boring Tool Bit For Profiling R/LAX123
SANDVIK
12 Day(s) or more -
CoroCut MB Adapter (Cylindrical Shank) Carbide Tool Bit, Internally Lubricated, MB-E-R
SANDVIK
12 Day(s) or more -
CoroCut MB Adapter (Cylindrical Shank With Flat Chamfering) MB-A-HP
SANDVIK
9 Day(s) or more -
CoroCut SL Blade Screw Clamp For Fluting And End Surface Grooving 570-R/L123-C
SANDVIK
5 Day(s) or more -
CoroCut SL Blade For Face Grooving, Screw Clamp, 570-R/L123-B
SANDVIK
4 Day(s) or more -
CoroCut XS SL 570-R/LSMAL
SANDVIK
11 Day(s) or more -
CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R/L151.21
SANDVIK
5 Day(s) or more -
CoroTurn SL70 Cutting Head With Coupling, For Round Inserts, Top Clamp, SL70-CRDCR/L
SANDVIK
12 Day(s) or more -
CoroTurn SL70 Cutting Head With Coupling, For Round Inserts, Top Clamp, SL70-CRSCR/L
SANDVIK
12 Day(s) or more -
Tool Bit Screw Clamp For Ceramic Grooving And Profiling Inserts R/LF150.23
SANDVIK
11 Day(s) or more -
CoroCut 1/2 Head For Grooving, High Pressure Coolant Technology SL70-R/LG-C
SANDVIK
11 Day(s) or more -
High Coat Paratip (for Cutting/Grooving) Holder
KOSHUHA
4 Day(s) or more -
Iscar, Holder
ISCAR
45 Day(s) -
Iscar, W, HF End Groove/Holder
ISCAR
45 Day(s) -
(Modular Grip/Top Grip Compatible) Adapter TGPAD○○R/L
ISCAR
45 Day(s) -
Kyocera Mill Routing Tip Holder
KYOCERA
3 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
4 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
4 Day(s) or more -
Sandvik T-Max Q-Cut Plunging/Grooving Shank Bit
SANDVIK
4 Day(s) or more -
Sandvik T-Max Q-Cut Plunging/Grooving Shank Bit
SANDVIK
4 Day(s) or more -
Sandvik CoroCut 1/2 Plunging/Grooving Boring Bit
SANDVIK
3 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
3 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
4 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
5 Day(s) or more -
Iscar, Holder Blade
ISCAR
45 Day(s) -
Iscar, Boring Holder
ISCAR
45 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
3 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
4 Day(s) or more -
Kyocera Mill Routing Holder Blade
KYOCERA
3 Day(s) or more -
Tungsten Alloy TAC Square Bit
TUNGALOY
4 Day(s) or more -
Grooved End Face Holder (for GVF Chip) GFV Type
KYOCERA
3 Day(s) or more -
Grooved End Face Holder Main Body (for GVF Chip)
KYOCERA
5 Day(s) or more -
Grooved End Face Holder (for GVF Chip) GFVS Type
KYOCERA
6 Day(s) or more -
Grooved End Face Holder (for GVF Chip) GFVT Type
KYOCERA
4 Day(s) or more -
Blade for Grooved End Face Holder
KYOCERA
4 Day(s) or more -
Tsukkirukun WCFH Type, Ultra-Hard Holder/Tool Block Type For Cut-Off
SUMITOMO ELECTRIC HARDMETAL
3 Day(s) or more -
Holder For Grooving NGTN
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving BG
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving NGTA
NTK CUTTING TOOLS
3 Day(s) or more -
Holder For Grooving GTPA
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving Y-GTPA
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving Y-GTPA-OH
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off CTPAR-SUB
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off CTPAL-SUB
NTK CUTTING TOOLS
3 Day(s) or more -
Holder For Cut-Off, CTP
NTK CUTTING TOOLS
3 Day(s) or more -
Holder For Cut-Off, CTP-OH
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off CTPR-SUB
NTK CUTTING TOOLS
3 Day(s) or more -
Holder For Cut-Off CTPL-SUB
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off CTV-X
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving GTV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving GKV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving GSV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving GFV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving CH-FGV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving FGV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving DS-FGV
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving TWG
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving S-TWG
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, CTDP
NTK CUTTING TOOLS
3 Day(s) or more -
Holder For Grooving SCRUM DUO (Shank: 20, 25) GTWPR/L-2
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving GKWP
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, CTV(-S)
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Grooving S-BG
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, CTPA
NTK CUTTING TOOLS
3 Day(s) or more -
Holder For Cut-Off, CTPW
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, CTV-K2
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, CTVN-K2
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, CTV-M(B)
NTK CUTTING TOOLS
5 Day(s) or more -
Holder For Cut-Off, NTG
NTK CUTTING TOOLS
5 Day(s) or more -
ProGroove Integral Tool Holder For Grooving and Profiling
WIDIA
23 Day(s) or more -
ProGroove Grooving And Cut-Off Integral Tool Holders
WIDIA
23 Day(s) or more -
ProGroove Grooving Integral Tool Holders, LG
WIDIA
23 Day(s) or more -
ProGroove Cut-Off Blade Holder
WIDIA
23 Day(s) or more -
WMT Series Grooving, Cut-Off And Face-Grooving Modular Tool Holder
WIDIA
4 Day(s) or more -
WMT Series Grooving And Cut-Off Modular Tool Holder
WIDIA
23 Day(s) or more -
WMT Series Face-Grooving Modular Tool Holder
WIDIA
23 Day(s) or more -
WMT Series Integral Tool Holder For Swiss Style Machines
WIDIA
4 Day(s) or more -
WMT Series Outer Diameter Cut-Off and Grooving Integral Tool Holder
WIDIA
4 Day(s) or more -
WMT Series Integral Tool Holder (Curve Out) For Face Grooving
WIDIA
4 Day(s) or more -
WMT Series Integral Tool Holder (Curve In) For Face Grooving
WIDIA
13 Day(s) or more -
WMT Series Internal Diameter Integral Grooving Boring Bar
WIDIA
23 Day(s) or more -
Holder For Grooving SCRUM DUO (Shank: 10 to 16) GTWPR/L-1
NTK CUTTING TOOLS
5 Day(s) or more บริหารงานและให้บริการโดย ทีมวิศวกรอาชีพ ครับผม
Contract Us ( ขอใบเสนอราคา หรือ ติดต่อสั่งซื้อสินค้าได้ที่นี่ครับ )
ติดต่อ คุณอ้น
โทรศัพท์ 098-2467624 หรือ 089-6086450
E-mail : thebest.td9@gmail.comLine iD : www.Amata-Spare.com
บริษัท เดอะเบสท์เทรดเดอร์แอนด์เซอร์วิส จำกัด
The best trader and service Co.,Ltd
Design by คุณอ้น • Powered by www.Amata-Spare.com Copyright© สงวนลิขสิทธิ์ เนื้อหาทั้งหมดภายในเว็บไซต์นี้ห้ามมิให้นำไปใช้ในเชิงพาณิชย์ หากฝ่าฝืนทางเราจะดำเนินคดีตามกฎหมาย
-
-
-
-
-
-
-