บริหารงานและให้บริการโดย ทีมวิศวกรอาชีพ ครับผม
Contract Us ( ขอใบเสนอราคา หรือ ติดต่อสั่งซื้อสินค้าได้ที่นี่ครับ )
ติดต่อ คุณอ้น
โทรศัพท์ 098-2467624 หรือ 089-6086450
E-mail : thebest.td9@gmail.com
Line iD : www.Amata-Spare.com
บริษัท เดอะเบสท์เทรดเดอร์แอนด์เซอร์วิส จำกัด
The best trader and service Co.,Ltd
-
Stepping MotorFor Unit
ORIENTAL MOTOR
Same day or more -
New five-phase stepping motor unit RK II series
ORIENTAL MOTOR
Same day or more -
42/57 series high torque hybrid type stepping motor with an integrated step angle of 1.8°
FULLING MOTOR
- 2D / 3D
Same day or more -
Stepping motor single unit 50 mm 1.8° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
High Torque Two-phase Stepping Motor, PKP Series, Standard Type
ORIENTAL MOTOR
Same day or more -
42 series 2-phase high torque hybrid type stepping motor with a step angle of 0.9°
FULLING MOTOR
- 2D / 3D
Same day or more -
Stepping Motor □42 mm (Thin-type)
SANYO DENKI
6 Day(s) or more -
Stepping Motor Unit – DC Input – CVK Series
ORIENTAL MOTOR
Stepper motors are used in a wide variety of applications due to their ease of use and highly accurate positioning features. In recent years, the demands for high torque, low vibration and high accuracy are constantly being required.
The CVK Series is a DC input stepper motor and driver package with higher torque, lower vibration and higher accuracy than conventional stepper products. The 1.8° stepper motor and driver package (“1.8° package”) focuses on torque and the 0.72°/0.36° stepper motor and driver package (“0.72°/0.36° package”) provides low vibration and high accuracy. The drivers for the 1.8° and 0.72°/0.36° packages are highly compatible. Therefore, it is possible to select a motor based on certain characteristics as the two packages’ mounting characteristics are similar, allowing for easy standardization. Replacing the motor can also be done easily.
Drivers for stepper motors are available in either AC or DC power-supply voltage. The DC type driver is usually less expensive, more compact and can be easily mounted in equipment. The CVK Series is developed for the DC power-supply voltage and is suitable for applications that require the driver to be mounted in the equipment.
Same day -
110 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
42 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FULLING MOTOR
- 2D / 3D
3 Day(s) or more -
“SANMOTION F” series Stepping motor with built-in driver including CAN open interface
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 86 mm 1.8° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 35 mm 1.8° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □60 mm 1.8°/step bipolar · connector type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 42 mm 1.8° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □86 mm 1.8°/step bipolar · lead wire type, CE model
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 56 mm 1.8° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
57 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
Micro step driver and stepping motor set CSA-UK series
SHINANOKENSHI
Same day or more -
Other Goods We Handle
ORIENTAL MOTOR
Same day or more -
60 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
Bipolar configuration product driver model number: BS1D200P10
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 14 mm 1.8° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
High torque two-phase stepping motor PKP series SH geared type
ORIENTAL MOTOR
12 Day(s) or more -
2-phase, 4-wire stepping motor driver – Applicable models: 86-130 series 2-phase hybrid stepping motor of 8.0A or less
FULLING MOTOR
- 2D / 3D
Same day -
Stepping Motor Single Unit □56 mm 1.8°/Step Bipolar Lead Wire Type
SANYO DENKI
89 Day(s) or more -
57 series 2-phase high torque hybrid type stepping motor with a step angle of 0.9°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
57 series 3-phase hybrid type stepping motor with a step angle of 1.2°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
Stepping motor with built-in driver
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 106 mm 1.8° / step bipolar lead wire type CE model
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 42 mm 1.8° / step unipolar connector type
SANYO DENKI
89 Day(s) or more -
86 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°
FULLING MOTOR
- 2D / 3D
Same day or more -
Set model configuration product driver
SANYO DENKI
89 Day(s) or more -
Optional product
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 28 mm 1.8° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 86 mm 1.8° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Controller built-in stepping motor “SSA-TR series”
SHINANOKENSHI
- 2D / 3D
4 Day(s) or more -
110 series 3-phase hybrid type stepping motor with a step angle of 1.2°-
FULLING MOTOR
- 2D / 3D
3 Day(s) -
Standard Model, DC Input Driver (Model Number: FS1D140P10) + Standard Motor
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 42 mm 0.9° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 86 mm 1.8° / step bipolar lead wire type CE and UL model
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □50 mm 1.8°/ step bipolar · lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □60 mm 1.8°/step unipolar · connector type
SANYO DENKI
89 Day(s) or more -
Servo Screwdriver & Stepper Motor Set CSB-BZ Series
SHINANOKENSHI
- 2D / 3D
4 Day(s) or more -
Stored data type controller SG8030J
ORIENTAL MOTOR
Same day -
Controller built-in micro step driver and stepping motor set CSA-UP series
SHINANOKENSHI
4 Day(s) or more -
Controller built-in micro step driver & stepping motor set CSA-UP series (USB-RS485 compact)
SHINANOKENSHI
4 Day(s) or more -
Step out detection driver & stepping motor set CSA-BX series
SHINANOKENSHI
4 Day(s) or more -
Unipolar configuration product driver model number: US1D200P10
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type DC Input Driver (Model Number: F5PAE140P100) + Harmonic Geared Motor
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type PBM423
SANYO DENKI
89 Day(s) or more -
Standard Model, PBM284
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □60 mm 1.8°/ step bipolar · lead wire type, NEMA23 mounting dimension compatible (47.14 mm pitch)
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBDM604
SANYO DENKI
89 Day(s) or more -
External Resistor Module for Motors
ORIENTAL MOTOR
■ Overview of the product
This external resistor module VCS01 can be used to connect the 24 VDC output type controller with the 5 VDC input type Oriental Motor driver. 5 sets of current-limiting resistor/signal-confirmation LED are mounted on this module.
Same day -
Controller built-in micro step driver and stepping motor set CSA-UP series (with power supply unit)
SHINANOKENSHI
4 Day(s) or more -
Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series
SHINANOKENSHI
4 Day(s) or more -
5-Phase Micro step driver and stepping motor set CSA-UB series
SHINANOKENSHI
4 Day(s) or more -
Compact micro step driver and hollow stepping motor set CSA-BA series
SHINANOKENSHI
11 Day(s) or more
-
-
86 series 3-phase hybrid type stepping motor with a step angle of 1.2°
FULLING MOTOR
- 2D / 3D
3 Day(s) -
Standard Model, DC Input Driver (Model Number: F5PAE140P100) + Standard Motor
SANYO DENKI
89 Day(s) or more -
Super Gear Model DC Input Driver (Model Number: F5PAE140P100) + Super Geared Motor
SANYO DENKI
89 Day(s) or more -
Separately sold options for DC input microstep set model
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type PBDM423
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBDM603
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type PBDM603
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBM282
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBM603
SANYO DENKI
89 Day(s) or more -
Standard Model, PBM604
SANYO DENKI
89 Day(s) or more -
Model No.PB4 Driver
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 42 mm 0.9° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 60 mm 0.9° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 28 mm 1.8° / step unipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Super geared model 28 mm
SANYO DENKI
89 Day(s) or more -
Standard model 28 mm
SANYO DENKI
89 Day(s) or more -
Linear drive stepping motor
SANYO DENKI
89 Day(s) or more -
Protection grade IP 65 stepping motor
SANYO DENKI
89 Day(s) or more -
Controller built-in micro step driver & stepping motor set CSA-UP series (power supply unit USB-RS485 compact)
SHINANOKENSHI
4 Day(s) or more -
CSA-UT series with two-axis-simultaneous-drive-speed controller and two stepping motors (with power supply unit)
SHINANOKENSHI
4 Day(s) or more -
Compact micro step driver and standard stepping motor set CSA-BA series
SHINANOKENSHI
4 Day(s) or more -
High output micro step driver and stepping motor set CSA-BB series
SHINANOKENSHI
4 Day(s) or more -
Other Goods We Handle
SHINANOKENSHI
4 Day(s) or more -
Harmonic Geared Type DC Input Driver (Model Number: FS1D140P10) + Harmonic Geared Motor
SANYO DENKI
89 Day(s) or more -
Standard Model, PBDM282
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBDM282
SANYO DENKI
89 Day(s) or more -
Model with spur gear PBDM282
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type PBDM282
SANYO DENKI
89 Day(s) or more -
Standard Model, PBDM284
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBDM284
SANYO DENKI
89 Day(s) or more -
Standard Model, PBDM423
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBDM423
SANYO DENKI
89 Day(s) or more -
Model PBDM423 with Low Backlash Gear
SANYO DENKI
89 Day(s) or more -
Standard Model, PBDM603
SANYO DENKI
89 Day(s) or more -
Model with spur gear PBDM603
SANYO DENKI
89 Day(s) or more -
Standard Model, PBDM604
SANYO DENKI
89 Day(s) or more -
Model with spur gear PBM282
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type PBM282
SANYO DENKI
89 Day(s) or more -
Standard Model, PBM282
SANYO DENKI
89 Day(s) or more -
Harmonic Geared Type PBM603
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBM284
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBM423
SANYO DENKI
89 Day(s) or more -
Model with electromagnetic brake PBM604
SANYO DENKI
89 Day(s) or more -
Low backlash geared model
SANYO DENKI
89 Day(s) or more -
Standard Model, PBM423
SANYO DENKI
89 Day(s) or more -
Standard Model, PBM603
SANYO DENKI
89 Day(s) or more -
Model No. PB2 Driver
SANYO DENKI
89 Day(s) or more -
Model No.PB3 Driver
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 60 mm 0.9° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 86 mm 1.8° / step unipolar lead wire type CE and UL model
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 86 mm 1.8° / step bipolar terminal block type CE and UL model
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 106 mm 1.8° / step bipolar lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □106 mm 1.8°/step unipolar · lead wire type
SANYO DENKI
89 Day(s) or more -
Stepping motor unit □56 mm 1.8°/step unipolar · lead wire type, CE model
SANYO DENKI
89 Day(s) or more -
Stepping motor single unit 60 mm 1.8° / step unipolar lead wire type NEMA23 mounting dimension conversion (47.14 mm pitch)
SANYO DENKI
89 Day(s) or more -
Super Geared Type DC Input Driver (Model Number: FS1D140P10) + Super Geared Motor
SANYO DENKI
89 Day(s) or more -
Speed Controller Built-in Stepper Motor “SSA-VR Series”
SHINANOKENSHI
4 Day(s) or more
-
บริหารงานและให้บริการโดย ทีมวิศวกรอาชีพ ครับผม
Contract Us ( ขอใบเสนอราคา หรือ ติดต่อสั่งซื้อสินค้าได้ที่นี่ครับ )
ติดต่อ คุณอ้น
โทรศัพท์ 098-2467624 หรือ 089-6086450
E-mail : thebest.td9@gmail.com
Line iD : www.Amata-Spare.com