Pulleys for Flat Belts (Width T=6 ~ 32) – Flanged, Crowned, Press-Fit Urethane

MISUMI

Straight, Crowned or Press-Fit Urethane Type can be selected to suit the current application.

CAD ：

2D / 3D

Idlers for Flat Belts-Flanged Type/Crowned Type/Width L6-32

MISUMI

Straight or Crowned Type can be selected.

• Volume Discount

CAD ：

2D / 3D

Idlers for Flat Belts-Straight Type/Crosspiece Groove Straight Type/Crowned Type/Width L25-100

MISUMI

Crosspiece Groove Straight, Crowned (No Flange) or Crowned (with Flange) can be selected.

CAD ：

2D / 3D

Pulleys for Flat Belts (Width L=25 ~ 100) – Crowned, Crosspiece Groove Straight

MISUMI

Crosspiece Groove Straight, Crowned (No Flange) or Crowned (with Flange) can be selected.

CAD ：

2D / 3D

Pulley for Flat Belts-Straight Type/Crosspiece Groove Straight Type/Width L110-500

MISUMI

Crowned Type (with the center a little higher than both ends) or Crosspiece Groove Straight can be selected.

CAD ：

2D / 3D

Idlers for Flat Belts-Straight Type/Crosspiece Groove Straight Type/Crowned Type/Width L110-500

MISUMI

Crowned Type (with the center a little higher than both ends) or Crosspiece Groove Straight can be selected.

CAD ：

2D / 3D

Pulley idler with flange (FIP, FIPA, FIPS, FIP-SUS)

IMAO CORPORATION

Pulley idler with flange usable for flat belts and timing belts. Available in plastic, aluminum, steel, and SUS.

CAD ：

2D / 3D

VFF Engineering Plastic Flanged Idler

NBK

● Material/Finish· Body: Glass fiber-reinforced Nylon 66· Bearings: steel, rubber seal

MC Nylon Flat Idler MCF

KONISHI

Flat idler made from MC nylon.

CAD ：

2D

Shaft Pulleys for Round Belts (Width L=25 ~ 100) – Straight, Crowned, Crosspiece Groove Straight

MISUMI

Flat belt pulleys with integrated shafts. Useful in reducing assembly part counts.

CAD ：

2D / 3D

Pulley Idler (NIP, NIPA, NIPS, NIP-SUS)

IMAO CORPORATION

Pulley idler usable for flat belts and timing belts. Available in plastic, aluminum, steel, and SUS.

CAD ：

2D / 3D

Flat Belt Driven Roller (RABS)

IMAO CORPORATION

[Teachers]· Usable as a following roller for flat belts.· As the flange height is even lower than the belt thickness, transport work to the top of the roller is possible.· Ball bearings are fixed with retainer rings

CAD ：

2D / 3D

Idlers for Flat Belts-Width L38-90

MISUMI

• Volume Discount

CAD ：

2D / 3D

Flat idler with shaft_VFJA

NBK

[Features]· Flat idler that can even handle heavy loads.· Recommended for use as a set with YSB.· Nut and washer included

CAD ：

2D / 3D

Idlers for Flat Belts-Width L100-300

MISUMI

Can be used with a Pulley for Flat Belts in a set.

CAD ：

2D / 3D

Pulleys for Stainless Steel Belts-Crowned

MISUMI

CAD ：

2D / 3D

Economy Pulleys for Flat Belts-Crowned Type/Crosspiece Groove Straight Type/Width L110-510

MISUMI

CAD ：

2D / 3D

Economy Idlers for Flat Belts-Straight Type/Crosspiece Groove Straight Type/Crowned Type/Width L110-500

MISUMI

CAD ：

2D / 3D

Aluminum flat idler_VFLA

NBK

[Features]· Main body is aluminum alloy, bearing is steel.· High precision and lightweight.· Products also manufactured to custom order.· Contact MISUMI for more information.· Main body and finishing: A5052, anodized.

CAD ：

2D / 3D

Crown roller (CTR,CTRS)

IMAO CORPORATION

[Features]· Crown-shaped roller.· Available in plastic and steel.· For prevention of belt meandering.

CAD ：

2D / 3D

Pulleys for Flat Belts with Urethane (Width L=25 ~ 100) – Crowned, Crosspiece Groove Straight

MISUMI

CAD ：

2D / 3D

Economy Pulleys for Flat Belts with Urethane-Crowned/Crosspiece Groove Straight

MISUMI

Use of thin pipes has realized price reduction by average 39% compared to the conventional products.

CAD ：

2D / 3D

Idlers for Stainless Steel Belts-Crowned

MISUMI

CAD ：

2D / 3D

Stainless steel flat idler_VFLS

NBK

[Features]· All stainless steel.· Use in combination with standard either shaft ZS (stainless steel).· Products also manufactured to custom order.· Contact MISUMI for more information.· Material and finishing: Main body SUS303

CAD ：

2D / 3D

Engineering plastic roller, steel roller (TC-RP, TC-RU)

IMAO CORPORATION

Plastic and steel roller suitable for auto-tightener TC-RE and auto-swing tightener TC-ABN.

CAD ：

2D / 3D

VFJ Flanged Idler With Axis

NBK

● Comes with nut and spring washer. ● Material/Finish· Body: Glass fiber-reinforced Nylon 66Bearings: steel, rubber seal· Nut / spring / washer: steel with trivalent chromate treatment· Bolt: steel· Collar: steel, black oxide coating (black)

VFL Engineering Plastic Flat Idler

NBK

● Material/Finish· Body: Glass fiber-reinforced Nylon 66· Bearings: steel, rubber seal